，永安市美孚齿轮油经销，梅列区美孚齿轮油戴理，三明市美孚齿轮油零售齿轮油应具有良好的抗磨、耐负荷性能和合适的粘度。此外，还应具有良好的热氧化安定性、抗泡性、水分离性能和防锈性能。由于齿轮负荷一般都在490兆帕(MPa)以上，而双曲线齿面负荷更高达2942MPa，齿轮油的用量约占润滑油总量的6%~8%。齿轮油是性能优异的润滑油 。 齿轮油以石油润滑油基础油或合成润滑油为主，加入极压抗磨剂和油性剂调制而成的一种重要的润滑油。用于各种齿轮传动装置，以防止齿面磨损、擦伤、烧结等，延长其使用寿命，提高传递功率效率。而双曲线齿面负荷更高达2942MPa，为防止油膜破裂造成齿面磨损和擦伤，在齿轮油中常加入极压抗磨剂，普遍采用硫- 磷或硫-磷-氮型添加剂 Gear oil should have good wear resistance, load resistance and appropriate viscosity. In addition, it should have good thermal oxidation stability, anti-bubble property, water separation performance and anti-rust performance. Since the gear load is generally above 490 MPa(MPa), and the hyperbolic tooth surface load is as high as 2942 MPa, the use of gear oil accounts for about 6 % to 8 % of the total amount of lubricants. Gear oil is an excellent lubricant. Gear oil is mainly based on oil oil oil base oil or synthetic lubricant, and an important lubricant is prepared by adding extreme pressure abrasives and oily agents. Used for various gear transmission devices to prevent tooth surface wear, abrasions, sintering, etc., to extend its service life and improve transmission power efficiency. The hyperbolic tooth surface load is as high as 2942 MPa. In order to prevent the rupture of the oil film from causing tooth surface wear and abrasions, extreme pressure abrasives are often added to the gear oil, and sulfur-phosphorus or sulfur-phosphorous-nitrogen additives are commonly used.