Structure: 3 tires and rotatable brackets
金耀造雪机的优势：自动化 360°旋转 质保长 不堵塞 不结冻
Advantages of Jinyao Snowmaking Machine: Automation 360 degree Rotation Quality Guarantee, Non-clogging and Non-freezing
金耀造雪机使用与保养
Use and Maintenance of Jinyao Snow Maker
开机前检查电源连接处是否有虚连。电压是否稳定。如果是发电机组供电，持续供电不可低于380伏。阀门是否结冰堵塞。如堵塞可开启电加热进行预热。喷嘴，核子器与喷头连接处是否密封。如密封圈老化或渗漏及时更换。确保风机及空压机正转。空压机油液面保持在红线处。造雪时如有结冰要及时清理以免飞溅伤人。每次造雪前检查压力表，气压表泄压阀性能；皮带涨紧度；使用完毕后把管路内余水排清。根据当地水质适当清洗喷嘴和过滤网。轴承,螺栓,伸缩杆,转盘定期注油保持各部件润滑度。每个雪季更换一次机油和空气滤芯。
Check the virtual connection at the power connection before starting. Is the voltage stable If the power supply is from a generator set, the continuous power supply shall not be less than 380 volts. Is the valve frozen and blocked If blocked, electric heating can be turned on for preheating. Is the joint of nozzle, nucleator and nozzle sealed If the seal ring aging or leakage timely replacement. Ensure positive rotation of fan and air compressor. The oil level of the air compressor is kept at the red line. If there is ice during snow making, it should be cleared in time to avoid splashing and injuring people. Check the performance of pressure gauge, pressure relief valve of barometer, belt tightening before each snowmaking, and drain the remaining water in the pipeline after use. Clean nozzles and filters properly according to local water quality. Bearings, bolts, telescopic rods, turntables are regularly oiled to maintain the lubrication of the components. Change the oil and air filters once every snowy season.
