美国VAL-TEX沃泰斯注脂枪QS-5000-

Val-Tex: Products: QS-5000-C (Air/Hydraulic)

 

Air / Hydraulic Lubrication Gun

 

Delivery: 8 ounces / 30-60 seconds 

Weight: 153 Lbs.

Lube Sealant Size: V, P-4

PSI Rating: 10,000 

Overall Dimensions: 46”H X 20”W X 26”L

Priming: Self-Priming Air / Hydraulic 

CFM Required: 20

Air Pressure Required: 75 - 100 PSI

Pressure Delivered through a 10 foot hose at 100 PSI: 

          Lube Sealant - 8,000 PSI 

          Valve Flush - 10,000 PSI 

Gauge: Included 

Lube Pack Compatible: Yes 

Internal Relief Valve: Yes

 

 

 

The Val-Tex QS-5000-C is a compact, easy to transport, fast, versatile, heavy duty lubrication unit that will pump large volumes of stick lube sealant, lube packs, and Valve Flush. The QS-5000-C is quickly separated into two parts by removing the cylinder for easy loading and unloading by one person. Assembly is as simple as inserting the two catch pins to secure the cylinder clamps to the frame.

 

The QS-5000-C has the largest stick lube sealant capacity in the valve lubrication industry. The Val-Tex five pound V-stick, four pound P-4 Lube Pack, and one gallon Valve Flush (VF-GAL) are designed to drastically reduce the frequency of loading.

 

The QS-5000-C's four inch pneumatic tires allow the unit to be maneuvered easily by one person. The rugged sealant cap wrench has 16 ounce graduations to allow the operator to control the amount of material being loaded. The unit comes complete with a 10 foot, 3/8 inch I.D. high pressure hose, quarter turn shut-off / bleeder valve, 15,000 PSI gauge, Gauge Guard, dual swivels, giant buttonhead coupler, and metal hydraulic fluid reservoir. The hydraulic pump requires only periodic maintenance and has an internal safety relief valve set at approximately 10,000 PSI to prevent over-pressuring.

 

Options Available

 

Sight glass modification to the metal hydraulic pump reservoir allows the operator to monitor the amount of material being pumped.

Air regulator (8607) rated for 3,000 PSI input and gauge (2052L160) rated to 160 PSI. Be sure to refer to your company’s policies before using anything other than compressor air for your power source.

Moisture separator (5604-2) and airline lubricator (5904-2) for protection for the pump.