品牌:RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新,始于2005……
进口电动法兰三通球阀能实现对管道中介质流向的切换,也能使相互垂直的两个通道连通或关闭。四阀座密封三通球阀不仅可实现介质流向的切换,也可使三个通道相互连通,现时也可关闭任一通道,使另外两个通道连通,灵活控制管路中介质的合流或分流
retz The imported electric flange three-way ball valve can switch the flow direction of the medium in the pipeline, and can also connect or close two perpendicular channels. The four seat sealed three-way ball valve not only switches the flow direction of the medium, but also enables the three channels to be interconnected. Currently, any channel can also be closed to connect the other two channels, flexibly controlling the convergence or diversion of the medium in the pipeline
功能介绍 Function introduction
进口电动法兰三通球阀用于换向分流或汇合流通,是具有二面或四面阀座的多通口球阀,任一通口可用作入口而无泄漏。三通既可制成L型通口也可制成T型通口 RETZ Three-way ball valve is used for reversing and diverting or converging flow. It is a multi-port ball valve with two or four seats. Any port can be used as an inlet without leakage. Tees can be made into L-shaped ports or T-shaped ports
L型流道的三通4面阀座球阀,采用2面阀座,受力平衡,保证闭止通道的可靠密封。主要用于流路的换向 Three-way four-side valve seat ball valve with L-shaped flow passage adopts two-side valve seat, with balanced stress, to ensure reliable sealing of the closing channel. Mainly used for commutation of flow path
T型流道的三通4面阀座,由于采用4面阀座,亚力平衡,保证闭止通道的可靠密封。主要用于分流、混流、换向以及三通道的完全开放 The three-way four-face valve seat of the T-shaped flow passage is balanced by Yali due to the four-face valve seat, which ensures the reliable sealing of the closing channel. It is mainly used for shunt, mixed flow, commutation and full opening of three channels
设计特色 Design features
防火、防静电设计 Fireproof and anti-static design
阀杆防爆出装置 Explosion-proof valve rod outlet device
阀球上设计有压力平衡孔 The valve ball is designed with a pressure balance hole
双层阀杆填料与对压碟型弹片装置 Double-layer valve stem packing and counter-pressure disc spring device
进口电动法兰三通球阀主要零件材料 Material of main parts
零件名称 材料名称
阀体 WCB 304(CF8) 316(CF8M) 316L(CF3M)
球体 2Cr13+氮化处理 304 316 316L
阀杆 2Cr13 304 316 316L
密封圈 聚四氟乙烯(PTFE)、增强聚四氟乙烯(PPL)、对位聚苯、柔性石墨
适用介质 水、气体、蒸汽、油品等 硝酸等腐蚀性介质 醋酸等腐蚀介质 尿素等腐蚀性介质
主要技术参数及性能 Main technical parameters and performance
公称通径 DN(mm) 15 20 25 32 40 50 65 80 100 125 150 200
允许压差(MPa) ≤公称压力
动作范围 0~90°
阀体形式 二段分体式铸造阀体
阀盖形式 整体式
压盖型式 螺栓压紧式
密封填料 V型聚四氟乙烯填料、含浸聚四氟乙烯石棉填料、石棉纺织填料、石墨填料
连接方式 法兰式、螺纹式(适用于1/2"~2")
阀芯形式 三通球型阀芯
流量特性 近似快开特性
泄露量Q 软密封:零泄露;金属密封:按GB/T4213-92,小于额定KV0.01%
基本误差 ±1%
回差 ±1%
死区 ≤1%
控制方式 开关到位灯(开关两位控制)、无源触点信号、1/5K电位计、智能调节(4~20mA模拟量信号控制)
执行器技术参数 Technical parameters of actuator
电源电压 AC220/380V,50/60Hz
输出力矩 50N•M~2000N•M
动作范围 0~90° 0~360°
动作时间 15秒/30秒/60秒
保护装置 过热保护
环境温度 -30°~60°
手动操作 同附带手柄操作
限位 电气、机械二重限位
防护等级 相当于IP-65
防爆等级 ExdII BT4;特殊要求可定制ExdII BT6
位置测量 可选装开关或电位计
驱动电机 8W/E
进线接口 PE1/2〞进线线锁