品牌：RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新，始于2005……
(流量控制阀)静态平衡阀可应用于空调、供热及生活热水系统中，用来平衡末端及环路流量之用。产品可应用于供水或回水管路 The static balance valve (flow control valve) can be used in air conditioning, heating, and domestic hot water systems to balance the end and loop flow. The product can be applied to water supply or return pipelines
进口静态平衡阀技术参数 Technical paramete
(流量控制阀)静态平衡阀可代替截止阀关断功能，产品携带有测量接头，方便与测量设备的快速连接，节省调试时间，具有行程锁定功能，当系统调试后可将锁定装置开启，方便日后可关闭静态阀进行管路维护与检修，结束后可以直接将阀门恢复到设定好的行程处，避免二次调试RETZ The static balance valve can replace the shut-off function of the stop valve. The product carries a measuring connector, which is convenient for quick connection with the measuring equipment, saves debugging time, and has the maximum stroke locking function. When the system is commissioned, the locking device can be opened, which is convenient for closing the static valve for pipeline maintenance and repair in the future. After the completion, the valve can be directly restored to the set maximum stroke to avoid secondary debugging.
进口静态平衡阀性能特点∶ Performance characteristics
Y型直流阀体结构，配合准确加工的锥形阀瓣 Y-type DC valve body structure, with precisely machined conical valve disc
精确流量控制，通过手轮具有关断功能 RETZ Precise flow control, with off function through handwheel
数字手轮开度指示，开度锁定简单 Digital handwheel opening indication, simple opening locking
带流量测量口 With flow measuring port
进口静态平衡阀选型参数
规格尺寸：F1-1/4-20" Specification and size: F1-1 / 4-20
工作温度：-10~120℃ Working temperature: - 10 ~ 120 ℃
公称压力：PN16 Nominal pressure: PN16
工作介质∶空调冷热水、乙/丙二醇溶液 Working medium: air conditioning cold and hot water, ethylene / propylene glycol solution
连接方式∶法兰 Connection method: flange
零部件材质 Component material
阀体：球墨铸铁 Valve body: ductile iron
阀芯：球墨铸铁/不锈钢/黄铜 Valve core: ductile iron / stainless steel / brass
锁紧螺钉：黄铜/不锈钢 Locking screw: Brass / stainless steel
阀座密封：PTFE/EPDM Valve seat seal: PTFE / EPDM
阀杆：2Cr13/黄铜 Valve stem: 2Cr13 / Brass
锁定芯杆:2Cr13/黄铜 Locking core rod: 2Cr13 / Brass
阀盖:球墨铸铁 Bonnet: ductile iron
紧定螺丝:不锈钢 Set screw: stainless steel
手轮:QT450 Handwheel: QT450
测量嘴∶ 黄铜/不锈钢 Measuring nozzle: Brass / stainless steel
静态平衡阀在开度≥50%时，误差不得大于±5%；10%≤开度≤50%时，误差不得大于±10%。故在产品选型时，建议设计流量下阀门开度大于50%为宜，同时为保证现场调试余量，阀门尽量设置在75%开度左右 RETZWhen the opening of static balance valve is ≥ 50%, the error shall not be greater than ± 5%; When 10% ≤ opening ≤ 50%, the error shall not be greater than ± 10%. Therefore, during product selection, it is suggested that the valve opening should be greater than 50% under the design flow. Meanwhile, in order to ensure the on-site commissioning margin, the valve should be set at about 75% opening as far as possible.
