TDNT系列摇臂式台面点焊机
TDNT Series Table spot welding Machine
特点及用途:
1、焊枪为垂直式或杠杆加压式结构设计，很容易伸到箱体深处进行焊接。
2、上电极为多关节摇臂形式，独有的平行关节结构使运转灵活、焊接方便、焊接范围更大，只移动焊枪即可在整个台面内焊接
3、下电极为水平工作台，工件可直接放置在工作台面上，操作简单，使用方便，无需特殊的技能或经验均可以轻松的操作。
4、采用气动加压，可降低操作者的劳动强度，获得恒定的点焊压力，使焊点均衡一致。对铁柜、箱体、操作台等产品进行焊接时，产品外表面没有任何焊坑，提高了产品质量。
5、焊接平台可在200mm范围内任意升降，方便不同形状和高度的产品焊接
Main Features:
1、Welding torch to the vertical type or lever pressure type structure design, easy to stretch to the depths of the enclosure to welding
2、For welding arm joint arm structure, unique parallel actuated flexible joint structure, welding range is bigger, every point can be easily reached
3、Level was under the table, the workpiece can be directly placed on the table, simple operation, easy to use, no special skills or experience are easily operation
4、Adopt pneumatic pressure, can reduce the labor intensity of workers, have spot welding constant pressure, make the solder joint equalization.On iron cabinets, cabinet, work station and other parts during welding, external surface of the parts without any welding pit, improves the product quality.
5、 At the same time in the 200mm range the lower welding flat table can go up and down freely, by this way it is suitable for welding various shape and size of products.
主要技术参数 Tmain Technical Parameters:
|
额定功率 Rated Capacity |
50KVA-200KVA |
|
额定电压 Input Voltage |
380V 50Hz/60Hz |
|
气源气压 Air Source Pressuer |
≥0.5Mpa; |
|
电极压力 Electrode Force |
≥2.2KN； |
|
台面尺寸 Welding Table Size |
800×1000mm(可定制) |
|
台面高度 Welding Table Height |
750-950mm（200mm自动升降） |
|
焊枪形式 Horizontal Gun or Vertical Gun(Optional) |
水平式/垂直式（任选一种或两种） |
|
焊枪总长 Welding GunLength |
395mm（可配垂直式焊枪） |
|
额定占载率 Rated for load rate |
50% |
|
冷却水量 The cooling water |
4-6L/min |
|
电极尺寸 Electrode size |
Φ16×50mm 锥度：K=1：10 |
|
设备尺寸 equipment size |
长:1280mm×宽:1000mm×高:1890mm； |
|
设备重量 Equipment weight |
850kg |
