月历日历装订机厂家工厂价格报价

  • 发布时间:2018-08-25 21:28:41,加入时间:2018年08月10日(距今2156天)
  • 地址:中国»广东»东莞:东莞市厚街镇沙塘村德朗智慧工场10号厂房
  • 公司:东莞市恒博装订设备有限公司, 用户等级:普通会员 已认证
  • 联系:张,手机:13564396415 微信:Z13564396415 QQ:506382605

4.台历装订机 挂历装订机 日历装订机 笔记本装订机孔位自动校正系统的调整 Adjust the corrective system

此工位主要是通过整形针来实现孔位校正的,根据产品的需要可调整整形针间的间距和角度。。This position is mainly through the pins to achieve hole correction, according to the needs of the product can adjust the space between the needle and angle.

5.台历装订机 挂历装订机 日历装订机 笔记本装订机自动绕线穿线系统的调整 Adjust the inserting system

机器出厂前已装有调试好的一套模具。当机器需要更换模具时,可按照以下步骤进行。The machine is shipped with a good set of molds. When the machine needs to replace the mold, follow the steps below.

5.1  台历装订机 挂历装订机 日历装订机 笔记本装订机穿线 Inserting the wire

将线穿入进线组件,经过过线轮24.1,润滑盒25,过线轮24.2,计数轮26(经过计数轮时将线绕计数圈)轮24.3,再经过铁线整直板(如图一),之后在芯棒上.24.1  24.2    24.3           25            27     28

Wire running Wheels          25. Wire lubrication case.            

26. Wire input device   27.  Counter wheel.        28. Optic sensor.

Insert wire into the wire input device, through the wire running wheels 24.1, Wire lubrication case 25. Wire running wheels 24.2 and counter wheel 26. (Turn around the wheel, when goes through the counter wheel). Wire running wheel 24.3 Then goes through the hole of the straighten stand (as photo) then the wire goes into the mandrill. 

5.2台历装订机 挂历装订机 日历装订机 笔记本装订机调试芯棒 Mandrill adjustment

5.2.1要成形不同大小的线圈,须选用相应的线圈芯棒,选定适合的芯棒后,先将芯棒插入主轴并从主轴的另一端用螺丝锁紧,开机运转时,芯棒应与主轴同心.

Chose suitable mandrill according to different coil size. After install the mandrill onto the main axis with tighten screws, the mandrill should be the same concentric of the main axis when the machine is running.

5.2.2机上有三个插针板,作用是固定线圈的齿距.插针板须定在对应的插针板座上,从前方向下编号顺序为1,2,3.

There are three pieces of pin stands. Order number 1,2,3 from the front to the lower one. Pins are fixed onto the stands for supporting the teeth pitch.

5.2.3把插针插入插针板上,注意针端与芯棒面须有的间隙(工具箱配有塞尺).间隙过大,线材表面会刮花,如针端与芯棒配合过紧,则会刮花芯棒表面,造成坑槽,容易卡线和刮花线材.

When install the pins please keep the gap betweenmm (tool box has feeler gauge). Once the gap too big the wire material easy get scratched. The mandrill could be scratched the surface if the pins too closed. The mandrill the slot caused and could be damage the wire materials, too.

河南省

郑州市  南阳市  新乡市  安阳市  洛阳市  信阳市  平顶山市  周口市  商丘市  开封市  焦作市  驻马店市  濮阳市  三门峡市  漯河市  许昌市  鹤壁市  济源市台历装订机 挂历装订机 日历装订机 笔记本装订机

联系我时请说明来自志趣网,谢谢!

免责申明:志趣网所展示的信息由用户自行提供,其真实性、合法性、准确性由信息发布人负责。使用本网站的所有用户须接受并遵守法律法规。志趣网不提供任何保证,并不承担任何法律责任。 志趣网建议您交易小心谨慎。