DOPPEL –LAG -615水性丙烯酸酯流平剂
Polyacrylate-based surface additive for aqueous coatings and adhesives to improve leveling. Improves the leveling and substrate wetting in aqueous and radiation-curable printing inks and overprint varnishes.
Product Data
Composition
Solution of a polyacrylate, ionic
Typical Properties
The values indicated in this data sheet describe typical properties and do not constitute specification limits.
Density (20 °C): 1.03 g/ml
Non-volatile matter: 52 %
Solvents: Dipropylene glycol monomethyl ether
Flash point: 75 °C
Applications
Coatings and adhesives
Special Features and Benefits
The additive improves leveling and prevents surface defects such as craters and pinholes. It is recommended
for all aqueous coatings and adhesives.
Recommended Levels
0.1-1 % additive (as supplied) based on the total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Printing Inks and Overprint Varnishes
Special Features and Benefits
The additive improves leveling and substrate wetting and prevents surface defects such as craters and
Pinholes. It is recommended for aqueous and radiation-curable printing inks and overprint varnishes.
Recommended Levels
0.1-1 % additive (as supplied) based on the total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a
series of laboratory tests.
