二手安捷伦N4433A回收|安捷伦仪器N4433A回收
电子校准件N4433A回收|电子校准件N4433A价格
联系人：谭先生
电话：
QQ：
：sj
公司：深圳市鸿一品仪器有限公司
地址：广东省东莞市塘厦镇新头村
-
备注：
本公司主要经营品牌有安捷伦，泰克，吉时利，安立，福禄克，惠普，罗德与施瓦茨，莱特波特，菊水等
主要经营产品：网络分析仪，频谱分析仪，信号发生器，通信电源，数字源表，噪声源，波形发生器，示波器，万用表，WiFi测试仪，蓝牙测试仪，综合测试仪。
主要回收城市：北京，上海，江苏，浙江，辽宁，广东，湖南，江西，福建，安徽，陕西，山西，河南，河北，湖北，黑龙江，贵州，四川等。
一样的仪器，不同的价格，一样的价格，不同的品质，一样的品质，不同的服务。
选择我们，你不会错！我们专业经营二手仪器十余年，专业更值得信赖！
--
主要描述
The Agilent N4431A RF electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full three- or four-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The Agilent PNA and ENA series of network analyzers controls the N4431A module directly through a USB interface. PNA Series network analyzers require firmware revision 2.5.
Fast full 3- or 4-port calibration with a single connection
NIST traceable accurate calibrations
Reduced connector wear
USB interface for direct control with PNA and ENA series of network analyzers
Reliable solid-state switching
Mixed connector option available (3.5 mm, Type-N 50 ohm, and 7-16)
The Agilent N4431A RF electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full three- or four-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The Agilent PNA and ENA series of network analyzers controls the N4431A module directly through a USB interface. PNA Series network analyzers require firmware revision 2.5.
Fast full 3- or 4-port calibration with a single connection
NIST traceable accurate calibrations
Reduced connector wear
USB interface for direct control with PNA and ENA series of network analyzers
Reliable solid-state switching
Mixed connector option available (3.5 mm, Type-N 50 ohm, and 7-16)
